The correct way of using the crusher is the groundwork for maintaining and can avoid more wear and tear of the jaw crusher.the operating methods are as follows:

  1. Untill the crusher run properly,you can feed the material.
  2. Crushing material should be evenly feed into the crushing chamber, should avoid feeding material from the side or piled, in order to prevent the unilateral overweight or withstand overload.
  3. Under normal circumstances, the temperature of the bearing should no more than 35 ℃, the highest temperature does not exceed 70 ℃. Once more than 70 ℃, should immediately stop, find out the reason.
  4. Before the downtime,first,you should stop charging work, ensure the crushing chamber was broken after complete discharge and then can shut down the motor.
  5. When works, if the downtime caused by crushing cavity material blocking, shall be immediately shut down the motor.remove the material to start the machine again.
  6. If one end tooth plate wear, you can use adjustable head.

Previous Article: Material Return Phenomenon In Jaw Crusher

Next Article: Movable Jaw Design In Jaw Crusher

Maybe you are interested:

Solutions